How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. Then it is necessary to purchase a new transponder. key have to be purchased.
Change your keys regularly to prevent one from deteriorating faster than the other. This will also keep your keys in top shape.
Replacement Case
The new key fobs are not like the old Saab keys. They're equipped with electronic devices which make it hard to duplicate. This has made stealing car keys much more difficult than twenty years ago. However, it also has made replacing lost keys a comparatively expensive undertaking.
Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. If one is lost, it is expensive to add another to the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are options to avoid these costs. Some parts dealers will use the code of an extra key to cut a brand new metal blade at a fraction what the dealer charges. The key must be the exact same as the original in order for it to function in your vehicle.
You can also replace the case yourself by following these steps. You'll need a flathead and a lot of patience. Utilizing the screwdriver, slowly break the plastic and separate the emergency key from the case. Once the case has been opened, remove all electronics and put them in your new case. Be sure to put the correct badge and key back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is a budget part that can be easily and quickly replaced. saab 93 key programming from Cyclone Cyd shows how to replace the remote fob battery in just four steps. This tutorial should work with any modern Saab key fob. However, the procedure may differ slightly.
This button is usually placed just below the Saab logo on the back of the fob. The button is usually found on the back of your fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver in the small hole in this button. This should be enough to let the fob case open so that you can replace the battery.
Once the new CR1632 battery is in place then you can reassemble your remote key fob, and then program it to your car. The entire process should not take more than an hour. It is a very simple process that does not require any special tools.
The process is more complicated if you lose your key, but it's possible. The dealer will have to find the VIN number of the car and then order a new key blade and a TWICE module with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it has an internal battery. They have a limited life span and will eventually die. This is a common problem that happens to all cars and the good news is that you can change the batteries on most fobs, without replacing the whole case. Amazon sells fobs for replacement that already have all the electronics installed. It is easy to open the case and replace the batteries. It is important to note that you will need to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. Use the screwdriver to move around the case, and it should split open, making it easy to remove.
If you're ready to change your keys, be sure to have a spare available. This can save you a lot of money. If you have a spare, you can ask the dealer to cut the new key and program it into your car, which is cheaper than replacing the whole key fob.
If you don't have a spare you can add another key to your car, however it requires a lot of research and effort. It costs around a hundred dollars to add an additional car key. The computer in the car also needs to be programmed. Professionals can accomplish this however it's a costly option.
Replacement Ignition
The current SAAB 9-3 is a more sophisticated alarm system that is based on a key code. If you lose your only key, it could be costly to replace it with another one because the car must have a specific computer installed and be programmed to accept a brand new key. Locksmiths typically aren't able to program this, and even a dealer will charge several hundreds of dollars just to program the new key!
Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) when you lose your only working key. Instead we can reprogram the EEPROM in your current car computer to prepare it for a new key, saving you over 50% of what you'd spend at a dealer.
If you have owned a SAAB 9-3 for an extended period of time you are aware that the ignition keys are not very durable. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become very sticky and the buttons have been known to fall off. The good news is that replacing the ignition key isn't as complicated as it sounds, and it can be done fairly quickly using the appropriate tools.